Product After Care and Upkeep Instructions
It is essential to follow the recommended aftercare instructions and upkeep for the services you receive from Tint Fresh.
This is a simplified layout of the aftercare instructions regarding the products and services we perform on your vehicles. Please refer to the subtitle that best describes the services you received.
Window Tint
It takes a minimum of 2-3 days for film to cure during the spring and summer. It takes a minimum of 5 days and up to 2 weeks for film to cure during the fall/winter. During the curing process, it is crucial that you do not roll your windows down or touch or clean your windows.
Streaking and clear mirror-like bubbles will be visible during the film-curing process but will completely dissipate when the film is cured. Please pay attention to the windows, and if you are still seeing any abnormalities, it is best to give the film more time to cure or to call the professionals to ask questions.
Please use only ammonia-free cleaners or tint-safe cleaners inside the windows where the window tint is applied. We also ask that microfiber towels or soft, nonabrasive towels be used to clean the tinted windows. Remove all tags from your rags so they won't potentially scratch the film. *Do not "scrub" windows*
We are here to ensure your tint looks amazing and that all questions or information regarding our services are as transparent as possible.
Exoshield
*NO CAR WASHES OF ANY SORT FOR 2 FULL WEEKS*
Please allow a minimum of 3-5 days for Exoshield to cure fully during the spring/summer and a minimum of 5-7 days during the fall/winter, and up to 45 days to fully cure. Avoid car washes and using windshield wipers during the curing process. We understand Washington is a rainy state, but it is important to give the film the time it needs to cure for the product to work at its highest functionality.
During the very rainy seasons, we may ask to keep the vehicle overnight to keep it dry to allow the film to dry out.
Similar to window tint, you may see initial distortion (moistures bubbles and or streaking), which is normal and will dissipate over time.
Exoshield is an optically clear film and is hydrophobic! So don't fret; this film is made to withstand the weather!
DO
- Keep your windshield wipers free of dirt and debris by cleaning the wipers regularly with a damp cloth
- Hand wash your vehicle with soap and water or use a touchless car wash
- Only use approved coatings or surface treatments on Exoshield
DON'T
- Don't pressure wash your windshield
- Don't use ammonia-based glass cleaners or windshield washer fluids that have isopropyl alcohol in them (i.e., any washer fluids that contain anti-freeze properties are a no-go, but ammonia free cleaners and tint-safe cleaners are safe)
- Don't use metal, perforated, or rough plastic ice scrapers
- Don't leave sap or droppings on Exoshield
Paint Protection Film
Wait at least 3 days and up to a week after installation to wash your car. ***Please remember that automated car washes can do more harm than good for your vehicle after PPF is installed. We highly recommend hand washing your vehicle or having it professionally detailed. Harmful chemicals and high-pressure washing can damage and or lift the film voiding the warranty associated with the Paint Protection Film.
Remove insects or other stains as soon as possible.
Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle's paint.
Light scratches in the film will self-heal at room temperature in 20-30 minutes. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.
Avoid using a pressure washer or high-pressure water source near the edges of the film; it can cause the film to lift or become damaged.
Detailing Clay can be used to remove contaminants that are on the film.
Please use XPEL-recommended products to wash and clean your vehicle. These products can be found at Xpel.com, and some can be purchased on Amazon. Some of these include: Xpel Rinse Free Wash, Xpel Detail Spray, Xpel Ceramic Boost, Xpel Sealant, etc.
Tesla Warnings
Tesla warns on their official site to refrain from using automated non-touchless car washes. Even though we caution you to stay clear of car washes after PPF installation, it is even more critical that teslas are hand washed and or professionally detailed to protect the areas we protected and, most importantly, your vehicle.
We’d love to hear from you! Call our friendly team at (360) 480-4196.